Yukon Cornelius

 It's been a while... I know :(

Years ago there was a sculptor/producer that was selling kits of the characters from Rudolph the Red Nose Reindeer. At the time I bought and painted the Burl Ives Snowman. After a little while I went to look for a few more only to find the guy disappeared.

I Would remember it  every Christmas time, but never went any further than to look for the kits. Then suddenly I remembered I had all this polymer clay around, why don't I try my own.

One of the characters that stood out to be besides Santa and Rudolph was the Abominable monster and the prospector, Yukon Cornelius.  So I decided to go with Yukon.

First I found a picture. Then there looked like there was something on his back. an even harder job was to find a pic of him from the back. But I did. It's a 3 pocket backpack with a sleep roll across the top -

 

I got out the Sculpey Medium and started in with the wire armature. I wanted Yukon the same size or a little bigger than the Snowman. 

I didn't plan out the connection of the head and body well enough, so the red in the next images is Aves and my attempt to fill on gaps. Another difference was that I didn't notice all the items in his belt. Then I found out that he originally had a gun, but somewhere that faded away. The other mistake I made was to sculpt the mustache out of regular clay. After snapping a piece I cut it all off and replaced it with Cosclay. This stuff is great. After it's baked it acts as if it rubbery. Now it can get bumped and not break off.

Next was the painting.  It was here that I found that some of the pics had him in a blue suit, but others in a green. I always remembered blue so that's what I went with. The finale pics show him on my work base. But since then I created an ice flow for him to stand on. Thanks for looking. 

POTC Davey Jones

 Unbelievable that this whole series is based on a Disney ride, Pirates of The Caribbean is one of the best in a combo of SFX and story (IMHO).  I've had this kit for the longest time, and as a matter of fact was misplaced for the longest.  

I picked it up at The Clubhouse's Swap and Sell forum years ago. This bust up looks like it could be 1:4 scale, and have no idea who the maker is. The kit comes in 5 parts - the body, sword hilt claw, right arm, and hat.

 Being a previously owned kit, it looks to have been started. The parts were very clean, and a primer was sprayed on. Looking for reference, most of them had the character is a blue light. That would be easy for me to do but I wanted something more in natural light. So I took the reference and added my own touches to it.  Also the "costume" (mostly digital I'm guessing) is a little too crusty for my taste. I'll tone that down. 

 

Plus a close up of the skin tone - 

 

The pics show Davey has a regular flesh skin tone, and the jacket has an underlying color of blue, so that's where I'll start and end for now. Stop back for more. Thanks for looking. 

 ~~~

Wild Bill Kelso - 1941

 It was a few BPMS meetings ago that a fellow figure modeler handed me Wild Bill. Thanks, Joe!  This is a 75mm miniature bust from Dolman Miniatures. Apparently sculpted on the computer, and the details are crazy! The kit is flawless resin body (tho if you really look, there are remnants of grow lines) and the hands are pewter. The base is resin from my stash. I don't seem to have an out of the box pic. Sorry. 

Looking at a few screen grabs, he's wearing a worn, brown leather jacket, and a white-ish scarf-

An unreal level of detail!

 

We all know what John Belushi looked like, but I needed a portrait to make sure I get as many details as I can. 

 

Having rather light color skin and a scruffy 5 o'clock shadow, that will help  the look. The shadow was done with the "poor man's airbrush" - pastels. For what reasons a dark blue works best for stubble beard. The flight cap looked like a combination of leather and fabric.

There was no real screen grabs of Belushi's jacket. There are patches all over the place. The best place to go for this is the model's page on the Dolman site.

The hardest patch is the one down his arm that point out the various cities. Because (I guess) it was designed on the computer, the artist was able to write the names of the cities in. But what I learned the letters were very shallow and I couldn't get  the dark paint to sit in the letters and survive adding the white over the top.  My choice was to use a .05 pen. Even with that I think the pen was larger than the letters. Oh well, I did the best I could. 

The idea was to paint the base a WW2 Olive Drab color, and then use a printout of the movie poster. In my rush to get finished - this was on my desk for a looong time - I took the final pics without the name plate. :P  Thanks for looking. 

Writing in the city names was the most difficult part!

And for the sake of size comparison, here it is with a US Quarter. 

 

Jabba the Hutt

 Bo-shoo-dah.  This time around we have another Gillman kit, that is Jabba the Hutt. It comes in 10 parts of gray resin - the bust, base, 4 gargoyle heads, and the 4 gargoyle rings. Don't remember why I didn't take a pic of the base, but you'll see it soon enuff.

 The closest primer color I had to the figure was a tan, so I gave it a covering. Then testing out what green I wanted, I tried out V's Black Green.

While that was drying I decided to do the gargoyle heads in a bronze color. They were never the center of attention, and I figured it would give the base a little color. Still not seen - the base was just painted gray and washed with dark colors.

 

For my 2nd session, there wasn't very many pics of Jabba (the puppet, not the CGI figure) from different good light angles, so my best guess from what I could see were oranges and tans (beside the green). The original green I used fit in well, but I didn't carry it as far up as I should have.  No matter, this is the benefit of me never mixing colors. ;)  Doing it all with the airbrush, made things go very quickly. 

 

For my final session, I just needed to neaten things up, do the eyes, glue the rings in the gargoyle mouths, and then since the gargoyle heads stick out from the base, I epoxied them in. I also added some Citadel Nihilakh Oxide to simulate some verdigris color.  Even tho it's the desert I picture that room like a wet musty cellar :P

With that, I was done. Thanks for looking. 

The Big Muddy Monster

 You just can't slow down Paul Gill and Co. Here's another of their kits (sculpted by Mark Van Tine). This time it's the Big Muddy Monster.  I have to admit I didn't know much about this guy. But because I collect Sasquatches, amongst other things, I had to pick him up. 

An easy one this time - only 2 parts  - the bust/base and the hand - of well cast resin. 

 Not finding a lot of pics for this guy, I stuck to my tried and true trio of browns. A gray for the tree trunk, and the the color will be from the green vines. Oh yeah there's a yellow lizard in the back too. ;) 

 I decided to carry the green onto the sign, and then to tie the whole thing together added a little swampy algae green wash to the fur.. With that I was done. Thanks for looking. 

 

Look in to my eye...

Black Krrsantan

 This was a new figure in the Star Wars story for me. Black Krrsantan (nicknamed Santy) was a Wookie bounty hunter first seen in Darth Vader 1 comic in 2015. The  IMHO ill fated Boba Fett mini series on Disney+, he was paid to get Fett...

 

This kit, from Gillman Productions, is a 4 piece 1/4 scale bust.  A very clean kit, it had only the slightest mold line thru the head hair - twenty minutes and that was cleaned up. 

The screen grab above is the image I used as reference. But it amazed me that the vast majority of the images were from the comics. I remembered that his pauldrons were a steel/silver color, but all of the comics images had him with gold/bronze color. So if you want to be different and do the comic Santy, the pauldrons is a way to make the difference. I stuck to Vallejo's Steel for mine. 

Eeven tho Santy is just black with gray streaks , I couldn't just leave the straight black. So here and there I mixed in a dark brown to make things a little more interesting. I didn't realized while watching the show, but on the kit his two scars were prominent. I painted them a tan color - WAY to bright. With a number of washes I was able to tone it down. The belt was a simple 3 colors, and I also toned that down with some Citadel Nuln Oil. 

The base was last and it was supposed to represent a bldg. in Mos Espa (?)  Here tans filled in the space. Some metal colors for the machinery on the side completed the project. Thanks for looking. 

 

Vladislav as a Cat in Clay

 Ever since the Sculpting Patreon group I was part of dissolved, I had a hard time coming up with ideas for something to do. So I ended up doing nothing. Until "What We Do" showed up on a cable channel.

One of the lesser known movies that I really like to watch over and over is the mock-umentary What We Do In The Shadows. It is the inspiration for the TV series of the same name. 

In the movie however, a film crew follows 4 vampires in New Zealand. The each have their various quirks, and one, Vladislav the Poker, played by Clement Jermaine.  Vlad was very good at transforming, until his difficult breakup with his girlfriend- The Beast.   From then on he could still transform but now he "couldn't get the faces right."  

The camera switches away to show Vlad as a cat but with a human face. 

This had to be brightened a lot to see what was gong on. 

 Now I knew what I wanted to do. While I'm not good at likenesses (and prolly never will be) how badly could I mess this up?  So I got to work and ended up with my version of Vlad Cat. I was thinking about casting a few before painting so he's still Sculpy gray.  Thanks for looking.