Ouroboros Cycle of Life

 I came across this kit in my secondary pile of To Do models. On the box it had a date of 2017, so it has to be at least that old. The name of the Co. which produced it was Blood Keep Miniatures.  But it doesn't really matter as when I first re-found the kit I looked it up and it is no longer in operation.  I did see that who I think is the sculptor as an STL of the kit available. You can see his work at ArtStation.

 The kit came in 11 parts of nicely cast resin.  The only problems problems with with the kit are two pieces (cleanly) snapped off the main parts. The other problem was the Death's head and the heads of the two horses were warped. Well, Death's Head was fine the middle horse was slightly off kilter, but the outside horse was off and shows a step in the one image.  

 

The above part showed the death book which had snapped off, and shows the hand with the hourglass that had to be attached. Thankfully I found an image I could enlarge to see how the parts exactly went together. 

 

For the "Life" art of the sculpt, another snapped off part ended up being part of her flowing cloak. These images helped me find it. Both arms and the 3 cherubs also had to be super-glued to the main body.

 I had to be careful where the left arm glue on as it also has to rest on top of that hourglass. I was hoping that it wasn't a case of it coming from a 3D design with the tolerances so tight that it would be a nightmare to have everything fit. No. Luckily I also used the gel type superglue that gave me a little extra time to match everything up. 

 

With that done it was in mostly 2 large sub assemblies with only his scythe, and her wings to add on. But first I have to fix that horses neck. But that's for next time. Thanks for looking and check back.